100:1 High Voltage probe
Can Moku:Lab be used with 100:1 probes ?
If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.
Moku:Go Arbitrary Waveform Generator Moku:Go Data Logger Moku:Go Frequency Response Analyzer Moku:Go Logic Analyzer & Pattern Generator Moku:Go Oscilloscope & Voltmeter Moku:Go PID Controller Moku:Go Spectrum Analyzer Moku:Go Waveform Generator Moku:Go Power Supplies Moku:Go Digital Filter Box Moku:Go FIR Filter Builder Moku:Go Lock-in Amplifier
100:1 probes are commonly used to measure higher voltages. Such probes have a 100 MΩ impedance and thus divide the measured voltage by a factor of 100 when used with Moku:Lab's 1 MΩ inputs. This enables Moku:Lab, with its +/- 5V input range, to measure much higher voltages.
Moku:Lab's Oscilloscope incorporates a probe scale factor to display the measured signal with the correct scale; tap on the 'Probe' scaling factor and enter "100x". This will then correctly scale the measured voltage.
Below we see Moku:Lab's Oscilloscope measuring US main voltage of 120 Vrms at 60 Hz.