What if Moku:Lab fails to start?
Written by Paul Cracknell
Updated at December 22nd, 2020
-
Moku:Go
Moku:Go Arbitrary Waveform Generator Moku:Go Data Logger Moku:Go Frequency Response Analyzer Moku:Go Logic Analyzer & Pattern Generator Moku:Go Oscilloscope & Voltmeter Moku:Go PID Controller Moku:Go Spectrum Analyzer Moku:Go Waveform Generator Moku:Go Power Supplies Moku:Go Digital Filter Box Moku:Go FIR Filter Builder Moku:Go Lock-in Amplifier
- Moku:Lab
- Moku:Pro
Moku:Lab does not turn on; factory or hard reset
If Moku:Lab fails to start or boot correctly, it will show a steady orange LED on the power switch for more than 2 minutes after power up. If this is so, you will need to perform a Hard Reset as explained here.