For Moku:Lab with firmware 580 and later, simply connect a micro USB cable between the Moku:Lab and your Windows PC. No further driver download is required; the Moku: app will automatically detected the Moku:Lab on the USB port.

1. Connect a USB cable between the Moku:Lab micro B data port and your PC
   
2. Open Moku: app, the Moku:Lab device should show up automatically
   

The below article refers to older Moku:Lab firmware, prior to version 580.

The Moku:Lab can connect to the Windows app via a simple USB cable; no ethernet or WiFi is needed. This is accomplished by a RNDIS ('remote network driver interface specification') over USB.

1. Connect a USB cable between the Moku:Lab micro B data port and your PC
   
2. Open Windows Device Manager, confirm a RNDIS connection under Network Adapters. If Moku:Lab shows up under 'Ports (COM & LPT) as a USB Serial Device, then please refer to this article on how to fix this issue.
    
3. Open the Moku:Master windows app and select Menu -> Connect -> Manual Connection to manually enter the IP address of the Moku:Lab. Each Moku:Lab will have a unique fixed IP address for its USB connection.                                
    
4. To obtain the unique IP address of a Moku:Lab when connected by USB, use this USB - IP address tool. You can find the serial number of your Moku:Lab by following this article.

Moku:Lab LED status during USB mode

When connected via USB, and with no other network connection available, Moku:Lab's power button LED will flash orange.