Moku LabVIEW API support over USB
Configure IPv6 port proxy
Written by Steve Kuhn
Updated at December 21st, 2023
-
Moku:Go
Moku:Go Arbitrary Waveform Generator Moku:Go Data Logger Moku:Go Frequency Response Analyzer Moku:Go Logic Analyzer & Pattern Generator Moku:Go Oscilloscope & Voltmeter Moku:Go PID Controller Moku:Go Spectrum Analyzer Moku:Go Waveform Generator Moku:Go Power Supplies Moku:Go Digital Filter Box Moku:Go FIR Filter Builder Moku:Go Lock-in Amplifier Moku:Go General Moku:Go Logic Analyzer/Pattern Generator Moku:Go Time & Frequency Analyzer Moku:Go Laser Lock Box Moku:Go Phasemeter
-
Moku:Lab
Moku:Lab General Moku:Lab Arbitrary Waveform Generator Moku:Lab Data Logger Moku:Lab Digital Filter Box Moku:Lab FIR Filter Builder Moku:Lab Frequency Response Analyzer Moku:Lab Laser Lock Box Moku:Lab Lock-in Amplifier Moku:Lab Oscilloscope Moku:Lab Phasemeter Moku:Lab PID Controller Moku:Lab Spectrum Analyzer Moku:Lab Waveform Generator Moku:Lab Time & Frequency Analyzer Moku:Lab Logic Analyzer/Pattern Generator
-
Moku:Pro
Moku:Pro Arbitrary Waveform Generator Moku:Pro Data Logger Moku:Pro Frequency Response Analyzer Moku:Pro Oscilloscope Moku:Pro PID Controller Moku:Pro Spectrum Analyzer Moku:Pro Waveform Generator Moku:Pro Lock-in Amplifier Moku:Pro Digital Filter Box Moku:Pro FIR Filter Builder Moku:Pro Phasemeter Moku:Pro Multi-instrument Mode Moku:Pro General Moku:Pro Logic Analyzer/Pattern Generator Moku:Pro Time & Frequency Analyzer
- Python API
- MATLAB API
- Arbitrary Waveform Generator
- Data Logger
- Digital Filter Box
- FIR Filter Builder
- Frequency Response Analyzer
- Laser Lock Box
- Lock-in Amplifier
- Oscilloscope
- Phasemeter
- PID Controller
- Spectrum Analyzer
- Time & Frequency Analyzer
- Waveform Generator
- Logic Analyzer & Pattern Generator
- Multi Instrument Mode
- Moku Cloud Compile
- Moku general
- LabVIEW
The following steps illustrate how to configure the port proxy in order to use the Moku LabVIEW API when connected via USB.
Step 1. Open Windows PowerShell
Open Windows Power shell (*** you must Run as administrator****) and paste the following command on the command line but do not hit enter yet.
netsh interface portproxy set v4tov6 listenport=8090 connectaddress=[fe80::7269:79ff:feb0:6ca] connectport=http
Step 2. Find your Moku's IP address
Open the Moku app and right click the device icon under Device info select Copy IP address.
Step 3. Update IP address in Windows Power shell
Go back to the Windows PowerShell command line and replace the IP address (fe80::7269:79ff:feb0:6ca) in the command with the IP address copied from the Moku app.
Hit enter.
Step 4. In LabVIEW set IP address to localhost:8090
For demonstration purposes we use the Moku LabVIEW API Oscilloscope example. Enter localhost:8090 for the Moku IP Address and hit Run.
Steps Video